Like most vehicles sold in the U.S., the Dodge Ram 1500 is fitted with a Tire Pressure Monitoring System (TPMS), which assists drivers in maintaining the correct tire pressure.
Where Is TPMS Reset Button on Ram 1500?
| Model Year | TPMS Reset Button Location |
| 2008 | Under the dashboard |
| 2009 | Under the dashboard |
| 2010 | Right of the steering wheel |
| 2011 | Under the dashboard |
| 2012 | Right of the steering wheel |
| 2013 | Right of the steering wheel |
| 2014 | Beneath the steering wheel |
| 2015 | Right of the steering wheel |
| 2016 | Right of the steering wheel |
| 2017 | Right of the steering wheel |
| 2018 | Right of the steering wheel |
| 2019 | Right of the steering wheel |
| 2020 | Beneath the steering wheel |
| 2021 | Right of the steering wheel |
How to Reset Dodge Ram 1500 TPMS?
Check the tire pressure
Before resetting TPMS on your Ram 1500, you should check your tire pressure to ensure it’s within the recommended range. Your Truck’s recommended tire pressure is usually indicated in the door jamb. If you can’t find it there, you can always refer to your owner’s manual or check within the EVIC panel in the gauge cluster. Using a tire pressure gauge, you check your tire pressure for all four tires.
If the pressure is below the recommended range, fill up your tires using a tire compressor. If you don’t own a tire compressor, you can find one in a gas station.
Turn on the ignition and reset
Once you’ve inflated your tires to the recommended PSI, proceed to turn on the ignition but don’t start the Truck. After doing so, locate the TPMS button in your Truck. Depending on the Ram 1500 model year, the reset button may be located beneath the steering wheel, on the dashboard, or the center console.
If you can’t find the location of your Truck’s TPMS reset button, you can always refer to your owner’s manual. Once you’ve located your Truck’s TMPS reset button, press and hold it for about three seconds or wait until the tire pressure light blinks three times and then release the button.
Drive at 50mph for 10 minutes
After releasing the TPMS reset button, start your Truck’s engine, let it run for approximately 20-25 minutes, and then switch off the engine. Doing so should reset the TPMS. If the TPMS light is still there, turn on the engine and drive at 50mph for about 10 minutes. For some models, 10 minutes may be overkill, especially if you’re driving at 50mph.
All you need to do to reset the TPMS is drive for a few minutes, and the TPMS sensor will adjust to the new tire pressure, hence recalibrating itself. However, some Ram 1500 models may require you to drive at a higher speed for longer before the TPMS sensors recalibrate themselves.
Disconnect the battery
If you’ve driven your Truck for several days and the TMPS light is still on, you should consider disconnecting the battery. Like most vehicles, your Truck is fitted with an onboard computer that regulates essential functions and ensures everything runs smoothly. However, this computer may face some glitches from time to time, and the best way to reset it is by disconnecting and reconnecting your Truck’s battery.
To do this, you’ll need a 10mm socket and wrench. If you have these tools, open your Truck’s hood and locate the battery. Remove the negative terminal with your Truck’s engine off and leave the battery unconnected for approximately 15 minutes. After 15 minutes, start the engine and push the horn for as long as your Truck needs to drain the remaining power.
Once all the power is drained, reconnect the battery and check whether the TPMS light has gone away. By disconnecting and reconnecting the battery, you’ve essentially performed a hard start on your Truck. Therefore, all your vehicle’s essential systems and functions, including TPMS, will relearn the existing operating guidelines.
Use a TPMS reset tool for your truck
If the TPMS light is still there after driving for several days and disconnecting the battery, consider using a TPMS reset tool. Fortunately, there are many TPMS reset tools in the market today, depending on your budget.
A TPMS reset tool is needed to reprogram the TPMS sensors if they lose vital information. The best thing about using this tool is that you can reset your Truck’s TPMS with a press of a button.
What Type of TPMS Does Ram 1500 Use?
Generally, the Ram 1500 uses a direct TPMS system. This means that the Truck’s TPMS sensors are fitted to the wheel. Therefore, if at least one tire indicates air pressure below the recommended range, the TPMS sensors will transmit this information via radio frequency (RF) to your Truck’s computer system. This will prompt an indicator light to appear on the dashboard.
For a direct TPMS system, a TPMS relearn is required every time you replace at least one of your Truck’s wheels. Ram 1500 trucks usually use 315MHz and 433 MHz TPMS radio frequencies, depending on the model year.
When Should I Reset TPMS on Ram 1500?
The best time to reset TPMS on your Ram 1500 is after changing your tires. This is mainly because your Truck’s TPMS system the current air pressure based on the size and weight of the original tires. Therefore, if you swap your old tires with new tires, it’s likely that the TPMS system will not provide an accurate reading.
Is It Necessary to Reprogram TMPS Sensors Every Time You Change Tires?
This usually depends on your Truck’s model. For instance, in some Ram 1500 models, resetting the TPMS using a TMPS reset tool is enough to reprogram the sensors after changing tires. However, in other Ram 1500 models, you have to reprogram the TPMS sensors every time you change your tires; otherwise, the sensors will transmit faulty readings.
Do TPMS Sensors Reset Themselves?
Even though some TPMS sensors are capable of resetting themselves, most don’t. This usually depends on your Truck’s sensors’ exact make and model. For instance, some TPMS sensors come with a ‘learn mode’ that must be activated before they can start transmitting information again. On the other hand, other sensors will continue transmitting information even if they’re not reset.
Can I Drive My Ram 1500 With the TPMS Light On?
While you can drive your Truck with the TPMS light on the dashboard, it’s not advised. Doing so will make it impossible for you to monitor your tires’ air pressure without using a tire pressure gauge.
Therefore, it’s best to fix the issue immediately to avoid driving with deflated tires that can easily ruin your fuel economy and accelerate your tires’ wear and tear. If the TMPS light pops up on your dashboard while driving, it’s best to pull over and call a professional mechanic.